Pre-inked and custom rubber stamps are known to be highly durable. With a minimal amount of care and maintenance, they can be used and run for years together. Unlike all other general, conventional stamps, they do not need to be refilled now and then, and thus, a striking rock and roll motion is not required for maximum ink flow. With a light press on the stamping surface, you can be availed of the best quality impression. Make sure that you are making the right and ideal choice when it comes down to stamping a not-so-ideal surface.
Few Steps Towards Properly Using a Rubber Stamp
The ink of rubber stamps is known to embed deeply into the paper. It air-dries quickly and effectively and uniformly spreads into the form. However, on surfaces like parchment and other surface-treated paper, it produces fewer desirable outputs. They are also not supposed to be used on plastic, glass and metal surfaces and non-porous surfaces like such can also leave you with undesirable outcomes.
The regular stamp comes into use with stamping on paper. They are also not used for industrial or commercial stamping for that purpose. Now let’s take a brief look at the cleaning and maintenance steps of the same:
- Cleaning the stamp surface:
Custom rubber stamps need to be stored in a dust-free environment such that no dust particles are accumulated on the stamp surface. This is one of the tacky sides of using these stamps. It becomes very difficult when it comes down to cleaning and maintenance of the stamp surfaces. Also, make sure that you do not allow the stamp to come in contact with any sharp object that might mislead the original shape of the same.
- Re-inking of the same:
By the time you notice that your impressions have started becoming slightly faded and light, you should understand that this is the time your stamps need to be refilled. By removing the handle, you shall easily be able to supply the ink box, and thus the design of the boxes is convenient enough to be filled too. However, one thing that needs to be taken care of in a situation like such is that you need to refill by using the original ink only. A range of ink colours is available in 10ml, 20ml and 60ml that you can use.
- Changing the colour of the ink:
It is very important to note that the colour of your ink is permanent and that it cannot be changed. There are conflicting formulae when it comes down to different colours of the ink, and the result might be a very blurry and mixed impression. This will lead you to have not-so-effective consequences. Changing colours will lead to the formation of pores in the paper that might clog the ink formulae. Thus, it is always advised to keep the ink colour the same.
- Make sure to use pre-inked refill ink:
All the brands of ink are not the same, and they vary according to the quality and the kind of output they produce. In several cases, it is seen that the ink is just a softening agent instead of being in its original form. There are also a group of reactivators present within the product, which affects its performance. Make sure that you give your stamp impressions just the right quality with rubber stamps.
Though there are several care steps and instructions when it comes down to the usage of rubber and custom stamps, it is always advised to keep the maintenance steps in consideration and go ahead.
Go ahead and contact the Stamp Store right now if you are searching for a firm that does justice when it comes down to quality impressions and cost-effective prices. For more details contact us now.
