It's not always an easy job, but it's also not impossible, and our step-by-step tutorial makes it as simple as possible.
Tile from a concrete floor
What percentage of the tile should be removed?
You won't need special equipment if you simply need to remove a few floor tiles; but, you'll need space to swing a hammer, which might be tough in a small space like a bathroom.
What tools are needed to remove tiles from concrete floors?
Patience is the most important tool for tile removal, but there are a few other items that can help.
• Wear heavy gloves, safety goggles, and a dust mask to protect yourself. Knee pads and earplugs will aid in the completion of a lengthy task.
• Basic tools — a club or drilling hammer will help, and a two- to three-inch cold chisel would suffice.
• Power tools - a hammer drill or rotary hammer might help you get the job done faster. • Large spaces – if you have a large space or a lot of room, a specialist floor scraping equipment may be worth renting.
• Clean up – removing tiles is a messy job that requires a shovel and some elbow grease.
To begin with
After you've gathered your tools and cleared the space, you may begin the removal process. Anything on top of the tiles must be removed, and it is critical to protect anything that could be harmed, including yourself, so make sure you have all of your protection clothing on hand.
1. Choose a location.
A loose or smashed tile, or just a region where the grout is less stable, is a good place to start.
2. Remove a tile
Insert your chisel at a correct angle into a seam. Hit the end of the tile with your hammer, and with luck, the tile will pop right out. If you don't, you'll have to hit a little harder.
3. Continue
When the initial tile is up, all you have to do is choose a direction and keep going - don't give up on a stubborn tile; it'll soon come right once you get started.
Finishing up
After removing the tiles, clean up any old mortar or adhesive that was holding the tile in place. This can be the most difficult part since you must be careful not to damage the concrete when you scrape away the adhesive. A hammer and chisel will suffice, but for larger sections, you may want to consider using an air hammer.
